Jason Pereira Continues His eMTB Race Journey with Leoguar
Jason Pereira's Podium Finish
The ebike race season started strong for Jason Pereira and his Leoguar Trailblazer. He raced against tough competition and earned an impressive third place spot. This result shows both his racing skills and his electric mountain bike's ability to perform under pressure. Jason shared the exciting news right after the event.
“Just wanted to give you a race update. Raced in the MBAA McDowell MeltDown eXC Race last Saturday Jan 10th and finished 3rd out of 16 racers.”
This achievement marks a big step forward in Jason's eMTB race journey. It also proves that the Leoguar Trailblazer can compete at a high level.
The Race Challenge
The McDowell MeltDown was not an easy ride. This race tested both endurance and smart racing tactics from start to finish. The eXC format means riders must give maximum effort throughout the entire race. Jason knew this would be a tough challenge going into the event.
“The McDowell MeltDown eXC Race was a 2-lap 10 miles a lap eXC, so you have to sprint the whole race if you want to get into the top 5.”
This sprint format is common in the competitive world of eMTB racing. Both rider fitness and motor performance get pushed to their limits over a demanding course.
A Story of Determination
Jason's path to the podium showed great race skills and determination. He started at the back of the pack but didn't let that stop him. Despite the poor starting position, he used the Trailblazer's climbing power to his advantage right away.
“I end up starting the race at the back of the pack again, but pass most of the field during the first climb.”
Racing on an unfamiliar course required smart thinking. Jason decided to follow other racers for the first lap to learn the best lines. This choice shows the experience of a seasoned racer who knows when to be patient.
“I didn't know the XC course, so I decided to follow 2 other races for the 1st lap, and by time I decided to pass them the 1st and 2nd place racers were gone.”
His combination of climbing power and smart pacing secured his podium spot. The image below shows the official Race Results, confirming Jason’s 3rd-place finish in the MBAA McDowell MeltDown event.
The Leoguar Trailblazer's Edge
Jason's emtb bike performed perfectly throughout the entire race. This gave him confidence to push hard against riders using bikes from major brands. The Trailblazer kept up with some of the most respected motor systems in the industry.
“The Trailblazer felt great during the race, no issues, was able to pass and keep up with the Avinox, Bosch and Specialized motors.”
This insight matters for new racers. It shows that Leoguar's motor system can compete with other established motor systems that dominate racing. The emtb bike delivered the power needed to stay competitive throughout the demanding race.
Planning the Next eBike Race
A true competitor always thinks about the next race. Jason is already studying his performance and planning changes to make his Trailblazer even better. He wants to fine-tune his setup for greater competitive advantage in future events.
“I will most likely try bumping the travel on the front & rear by 10mm and try faster rolling tires for the next race. I will try to get a few more photos next race.”
His planned upgrades offer valuable tips for other riders:
- Suspension: Adding 10mm of travel to front and rear will improve handling on rough terrain.
- Tires: Faster-rolling tires will help increase speed on smoother course sections.
A Podium-Proven eMTB
Jason Pereira's third place finish proves the Leoguar Trailblazer is ready for serious competition. The emtb bike showed it can compete at high levels against established brands. This result gives confidence to other riders considering the Trailblazer for racing. We look forward to following Jason's journey and seeing what he accomplishes next with his proven eMTB.
FAQ
Q: What type of race did Jason compete in?
A: Jason raced in the MBAA McDowell MeltDown eXC Race, which was a 2-lap, 20-mile cross-country sprint format where riders must maintain high intensity throughout the entire race.
Q: How did the Leoguar Trailblazer perform against other motor systems?
A: The Trailblazer performed excellently, keeping up with and passing electric bikes equipped with Avinox, Bosch, and Specialized motors without any mechanical issues during the race.
Q: What upgrades is Jason planning for his next race?
A: Jason plans to increase the suspension travel by 10mm on both front and rear and switch to faster-rolling tires to improve speed and handling for future races.
Q: How many riders participated in the race?
A: There were 16 total racers in Jason's category, making his third-place finish a strong result in a competitive field.
Q: What racing strategy did Jason use on the unfamiliar course?
A: Jason chose to follow two other racers during the first lap to learn the course lines before making his move, demonstrating smart tactical racing rather than rushing into unknown terrain.
Leave a comment